See how others have designed their stair railings, glass railings for patios, or post-free railings for balconies. Find inspiration among modern, classic, and discreet solutions – all with a personal touch.
Browse our frequently asked questions and answers, or contact one of our specialists, who are always here to help you.
Use lukewarm water, a mild detergent (dish soap), and a soft cloth. For tougher stains, there are special cleaning products for stainless steel. Always rinse thoroughly with clean water afterward. Never use steel wool or brushes with metal bristles, as these can scratch the surface and actually cause rust.
When you order a custom-made railing, the number of rails is automatically calculated so that the spacing meets the Swedish National Board of Housing, Building, and Planning’s requirements for a child-safe railing (maximum 100 mm gap).
Yes, it's a very popular combination for creating a cozier atmosphere on your patio. You can choose a crossbar made of wood such as oak or jatoba to match your patio deck and railing.
A stainless steel railing isn't completely maintenance-free, but with the right care, it will stay in good condition for decades. We recommend cleaning it 1–3 times a year with a soft cloth and a mild detergent.
In coastal or urban environments, more frequent maintenance may be necessary to remove salt and particles that can cause surface rust.
Yes, we include the components and brackets required for your specific order so that you can complete your railing.
Yes, vertical bars provide a classic frame and are also a safe choice for balcony railings, as they prevent climbing
Aluminum is lighter and naturally corrosion-resistant, while stainless steel is heavier and extremely durable. Aluminum railings are often more affordable, easier to install, and completely rust-free—while stainless steel is best suited for particularly harsh environments or where higher load-bearing capacity is required.
A railing from Balustradedesign is a long-term investment with an exceptionally long service life. Aluminum and acid-resistant stainless steel (AISI 316) are extremely durable materials that do not rot or weather away. With proper installation and a certain amount of regular maintenance, you can expect the railing to last for several decades while retaining both its function and its appearance.
Your shopping cart will be emptied if you switch to a different country.
Breeze is a stainless steel railing with vertical bars that can be customized in terms of height, mounting type, and crossbars—depending on the environment and specific needs.
Vertical bars
Larger spacing
Smaller gaps
Round stainless steel, 42 mm
Round Oak, 43 mm
Round Jatoba, 43 mmBreeze is a railing made of acid-resistant stainless steel (AISI 316L) with vertical round bars—a solution for those who want a safe and stylish railing that offers good visibility. The design with vertical round bars minimizes the risk of climbing and is particularly well-suited for areas where fall height or child safety are important factors.
The system is customized to your measurements and delivered as a complete kit with cut-to-length rods, posts, and pre-drilled parts. Everything is ready to assemble without welding or special tools.
Breeze is used wherever you need a railing that not only marks a boundary but also protects against falls. It’s ideal for those looking for a safe and clearly defined boundary, especially where there are changes in level or where children are present. Examples of use:
With its vertical bars, Breeze offers a distinctive yet understated look—while meeting high standards for safety, functionality, and durability.
Installing Breeze is easy—even if you’ve never done it before. The system comes as a complete kit with posts, rails, screws, and mounting hardware.
All parts are pre-drilled, cut to your specifications, and ready to assemble right away—without welding or special tools.
Here's how it works:
Want to skip the installation? In much of Sweden, we offer installation services in collaboration with our partners. Learn more here »
Once you've placed your order, you'll have access to our video guides. In them, we show you exactly how to assemble Breeze—based on the choices you made in the configurator.
Breeze is manufactured at our production facility in Ängelholm. By handling the design and manufacturing in-house, we have full control over quality, strength, and the safety requirements that apply to railings in exposed environments. Each order is customized according to your specifications and comes with a declaration of performance.
Our production is certified in accordance with EN 1090-1 and complies with the applicable Eurocodes for load-bearing aluminum construction products and stainless steel components. It is continuously monitored by RISE (Research Institutes of Sweden), which is responsible for external verification of traceability and processes.
Breeze is made of acid-resistant stainless steel (AISI 316L)—a material with excellent resistance to corrosion and wear, designed for long-term use both indoors and outdoors.
Here you'll find technical specifications, dimensions, installation instructions, and performance declarations for Breeze.
This information provides a clear picture of how the railing is constructed and helps you plan, compare, and install the right solution for your project.
Load-tested posts
The posts have been tested when mounted on top of a wooden base and can withstand a load of 0.5–1.0 kN/m.
Round Profiles, Ø 42 mm
Round stainless steel posts with a diameter of 42 mm. For indoor use: AISI 304; for outdoor use: AISI 316.
AISI 304 or 316 stainless steel
If your stainless steel railing is installed indoors, the posts are made of AISI 304 stainless steel. If, on the other hand, it is to be installed outdoors, AISI 316 is used instead, which is acid-resistant stainless steel.
Sheet thickness: 2 mm
Round profiles, Ø 12 mm
Round, horizontal bars made of acid-resistant stainless steel (AISI 316) with a diameter of 12 mm. Material thickness: 1.5 mm.
Round profiles, Ø 12 mm
Round vertical bars made of acid-resistant stainless steel (AISI 316) with a diameter of 12 mm.
Stainless Steel Crossbars
Round stainless steel crossbars (Ø 42 mm). AISI 304 for indoor use and AISI 316 for outdoor use. Fittings are included for any corners.
Wooden Crossbar
Round crossbar (Ø 43 mm) in untreated light oak or jatoba (a hardwood with properties and an appearance similar to teak).
Angles
If there are any corners on the railing, you can bend the wooden crossbar yourself. This ensures a precise fit. Corner fittings are included for stainless steel crossbars at angles greater than 90 degrees.
Symmetrical Sections
When you enter your measurements in our configurator, you always enter the edge measurements at the location where you want the railing installed. Our configurator then makes the necessary adjustments. We then customize the section dimensions for your railing so that each section on each side is the same length. In other words, we adapt the railing to your measurements—not the other way around.
Selectable railing height
In the configurator, you can select the height of your railing, ranging from 800 to 1100 mm, measured from the floor to the top of the railing. According to Boverket standards, railings must be 1100 mm high in areas where the risk of a fall exceeds 3 meters.
—Customized to the Millimeter
When you provide your measurements, we ask that you be precise to the millimeter. We craft your railing to the millimeter so that it fits perfectly in the spot where you want to install it.
Mounting on top of
The base is secured to the floor with 4 screws.
Top rail with or without wall mounting
If the railing is mounted on a wall, you can also choose to mount the top rail to the wall. This can result in a slightly more stable structure.
Wood Screw
If you choose to mount the product on a wooden surface, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal—Corrosivity Class C4. The screw features a milled groove along the shank and one at the tip. This results in a very low screw-in torque in harder wood and minimizes cracking.
Concrete Mounting Screw
If you choose to mount the product on a concrete surface, screws for this purpose are included. The screw is made of hardened steel and, for outdoor use, is also surface-treated with Corrseal—Corrosion Class C4. Approved for use in cracked concrete, uncracked concrete, and hollow-core slabs.
Also suitable for solid brick, perforated brick, solid Mexi brick, and natural stone. When mounting in materials other than wood or concrete, we recommend contacting your local hardware store.
Complete Construction Kit
Our shipment includes everything you need for assembly. In addition to posts, rails, and crossbars, it also includes all screws, drill bits, and any special tools required. If you have a screwdriver, a wrench, a folding rule, and a level, you really don’t need anything else.
Assembly Videos and Instructions
The videos show various steps to help you with your assembly. Our assembly tips and videos are customized for each order. In other words, these are not general descriptions but are tailored specifically to your order.
Stainless Steel Components
Since stainless steel, despite its name, is not resistant to corrosion, all stainless steel components need to be maintained and cleaned 1–3 times a year. If the railing is installed in a coastal environment, cleaning and treatment may need to be performed more frequently. Clean the surfaces with lukewarm water and a mild detergent using a soft cloth.
Wooden Handrail Crossbar
If the railing is to be installed outdoors, we recommend cleaning the crossbar and then sanding it with fine-grit sandpaper. Treat the crossbar with a wood preservative, such as wood oil or a similar product, depending on the prevailing conditions. For indoor installation, only cleaning and light sanding are required. Treatment with wood oil or a similar product can be applied if desired. All oak contains tannic acid in varying amounts, depending on the wood’s moisture content. This is because tannic acid helps prevent the wood from rotting. When your oak crossbar or handrail is exposed to moisture for the first time in an outdoor environment, tannic acid is released, which can cause discoloration on the surface it rests on. Therefore, we recommend oiling the wood or, alternatively, applying oxalic acid during installation to minimize the release of the acid. Oxalic acid can also be used to clean discoloration from the surface. Consult your paint supplier before using oxalic acid. To keep the wood looking its best, we also recommend oiling it once a year.
When you’re assembling your railing, the usage class (A+, A, B, or C) provides an indication of where the railing is suitable for use. The classes are based on current building codes and our own product tests, and take into account the choices you’ve made regarding railing height, section width, details, and so on. You can think of the class as a recommendation to help you make the right choice!
Class A+
An A+-rated railing meets the Swedish National Board of Housing, Building and Planning’s requirements for railings where the fall height exceeds 3 meters from floor level to ground level, and is therefore suitable for use in all types of residential environments as well as public spaces such as offices, restaurants, and stores. Our A+-rated railings can withstand a minimum linear load of 1 kN/m, and where the railing includes glass, it is safety glass designed to prevent injury in the event of an impact.
Class A
A Class A railing meets the Swedish National Board of Housing, Building and Planning’s requirements for railings where the fall height exceeds 3 meters from floor level to ground level, and is therefore suitable for use in all types of residential environments. Our Class A railings can withstand a minimum linear load of 0.5 kN/m, and where the railing includes glass, it is safety glass designed to prevent injury in the event of an impact.
Class B
Class B railings are suitable for use in environments where the height difference between the floor and the ground is 0.5–3 meters. Our Class B railings can withstand a minimum linear load of 0.5 kN/m, and when the railing includes glass, it is safety glass designed to prevent personal injury in the event of an impact.
Class C
Class C railings are suitable for use at ground level. If the railing includes glass, it is safety glass that prevents personal injury in the event of an impact. A railing may also be classified as Class C if Balustradedesign , in consultation with you as the customer, makes a modification to the railing that deviates from our standard design. In such cases, the Class C designation indicates that this specific configuration has not been tested.
